HVAC Equipment
Packaged Chiller
Heating & cooling plant
Packaged chillers for commercial and industrial HVAC plant, supplied, installed, and maintained as part of full MEP scope — sized from a real load calculation, not a floor-area rule of thumb.
Sized to your design conditions
Unit selections are made against your design wet-bulb, duty and site constraints — not a catalogue nominal.Specification
Technical specification
Related
Other equipment in this range
Air Handling Unit (AHU)
Coils & filtration
Coil and filtration sections built into HVAC and MEP installations, sized from a full load calculation — envelope, occupancy, and process gains — rather than an estimate from floor area. Commissioned with airflows balanced and recorded, not just switched on.
View specificationHigh-Efficiency Industrial Crossflow Cooling Tower
Induced draught · Crossflow
Air moves horizontally through the fill while water falls through it from an open basin above, so the fill and nozzles can be checked and cleaned without opening pressurised lines or the casing. Sized against the site's real design wet-bulb temperature, not a catalogue nominal.
View specificationSSS Cooling Tower
Modular · Light commercial
Sized for loads below full industrial duty — tighter plant rooms, rooftops, and budgets where a heavy industrial-frame tower is more than the job needs. Arrives in sections built to pass through a standard door and stairwell, often the deciding factor on a retrofit.
View specification