Condenser, evaporator and cooling coils built to duty, or to the face dimensions and connection positions of a coil already in service.
- Construction
- Copper tube, aluminium fin
- Fin spacing
- 2.1–3.2 mm
- Rows
- 1–8
- Fin coating
- Bare aluminium, epoxy or hydrophilic
Figures are indicative. Sizes, materials and duty are confirmed against your drawing and a site survey before quotation. Part of our Shell & Tube Heat Exchangers service line, so we supply, install and maintain it.
What it does
Replacing only the coil avoids disturbing the casing and pipework of an existing unit. The old coil is measured and the replacement built to the same face size, rows and connections, with the fin pitch and coating chosen for the site. Every coil is pressure tested before dispatch.
Specification
| Construction | Copper tube, aluminium fin |
|---|---|
| Fin spacing | 2.1–3.2 mm |
| Rows | 1–8 |
| Fin coating | Bare aluminium, epoxy or hydrophilic |
| Testing | Pressure tested before dispatch |
Where it fits
- Air-cooled condenser re-coiling
- AHU cooling and heating coils
- Chiller condenser coils
- Dry cooler and radiator cores
Options and accessories
- Epoxy or hydrophilic fin coating
- Wider fin pitch for dusty sites
- Built to existing face dimensions
Related equipment
From the same range, and the plant it usually works alongside.
Heat Exchangers
Shell & Tube Heat Exchanger
TEMA and ASME VIII design, fabrication and re-tubing
Heat Exchangers
Industrial Evaporators & Unit Coolers
1 kW to 2,000 kW+ cooling on chilled water, brine or DX
Cooling Towers
Industrial Crossflow Cooling Tower
Induced draught crossflow, single or multi-cell
Cooling Towers
SSS Modular Cooling Tower
Modular towers for light commercial and process duty
Send the duty, we'll size the unit
Send the duty, the site conditions and any existing nameplate data. An engineer replies with questions first, then a costed selection.
Plant down right now? Call the breakdown line on +966 53 783 7389, any hour.